CAB Apollo 1 Návod k obsluze stáhnout pdf (Strana 35)

35cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

Fig. 6 b Media loading Apollo 2/3

4. Swing the media retainer (4) downwards to the media hub (3) and push it

inwards until it rests against the side of the label roll.

Tighten the knurled screw (5).

5. Slide the media guide (8) into its outermost position.

6. Unroll a length of label stock from the media roll and feed it through as

shown in Figure 6 a/b.

NOTICE !

It is particularly important to ensure that the media strip slides properly

between the fittings of the adjustable photocell assembly (9).

7. Slide the media strip right through the space between the print roller and

the printhead until it comes out of the Apollo.

8. Slide the media guide (8) back towards the edge of the media strip.

9. Turn the lever (1) counter-clockwise until it stops and, thereby, lock the

printhead.

NOTICE !

If you do not use the printer for an extended period of time, lift the

printhead to avoid possible flattening of the print roller.

1 2 3 4 5

9 78 6

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 138 139

Žádné komentáře

CAB Apollo 1 Návod k obsluze Strana 35