CAB a3-2 Uživatelský manuál stáhnout pdf (Strana 12)

12 12

Transport Module

Fig. 6 Removing / mounting transport module 1

Removing

X Remove the tear-off plate/cutter.

X Remove the casing.

X Unplug the connector (1) of the label sensor (2).

X Move the label sensor as far as possible to the operator’s side w Operator’s Manual.

X Remove screw (3) and 5 screws (4).

Fig. 7 Removing / mounting transport module 2

X If the printer is equipped with a cutter connection cable :

• Remove control panel.

• Unplug connector (5 / g. 5) from the control panel.

X Remove the transport module (7) with the printing roller (6) by tilting from the chassis (5).

X Pull the cutter connection cable (8) downward out of the transport module (7).

Mounting

X Mount the assembly units in reverse order.

Replacing Assembly Units

1 2 ... 7 8 9 10 11 12 13 14

Žádné komentáře

CAB a3-2 Uživatelský manuál Strana 12